Pars Navard Computer Co,Ltd.
19th May 2024
Partners
Products
  C88 / Comfort
  Compact /Path Control 
   Minipos / Cost-Effectiveness
   PCCNC / Fexibility
  Motors / Motion Control
  Equipment / Accessory Devices
   
  Equipment / Accessory Devices
  Engelhardt Accessory for the series C / F / D / S
Auxiliary equipment and control element

LCD-Hand box
Remote control of any operation mode just like on the CNC keyboard. Each axe can be chosen by a key separately. The LC - Display shows, according to chosen operation mode, actual values, program data, parameters, a.s.o. The F override can be operated by a built in potentiometer Any axe can be moved by a built in mini hand wheel.

Joystick
Analogue Joy stick for movement of three axis continuously (simultaneously also) to the chosen direction. Active in Hand mode of the CNC. Cable length of 6m.

USB Interface
Connection to the CNC via V24 interface up to 19200 Bd. Baud rate adjustment automatically. Operation via the Menu EXTERNAL DATA of the CNC. File browsing over sub­ directories on the stick, too. File names limited to 8 letters.

Build in a aluminum housing (91,5 x 43,5 x 85) ready for panel mount. Power on switch, 1LED stick active, 2 LED communication / ready. 1x USB connector 1x 9 pol. Sub D V24 interface. Delivery includes 1 USB Stick and V24 cable. Backup of CNC data to commercially available USB sticks. Read / write possible in any PC. Approved up to 4 GB actually.

Network-Interface
Interface board which can plugged in the 19" rack of the CNC. 1xRJ45 Network 1x 9pol. Sub D V24 Interface Delivery includes interface board and V24 cable, software Dienst2net.

Two operation modes are possible:
1-As FTP Client: Data transfer via FTP from a network drive. In the network there has to be a FTP Server installed and running.
2-Data transfer managed by the program Dienst2Net which was developed in our company. The program transfers data from /to the CNC via network or V24 interface.



  User Manual
  Data Sheet
Copyright © 2011 - www.parsnavard.com